banner



How To Use Wireless Controller On Pc

Steps

  1. 1

    Plough on your controller and connect it to your PC. Plug the narrow end of the controller'southward USB charging cable into the controller and the large end of the USB cable into one of your computer's USB ports.

    • To turn your controller on, press the stylized "PS" button in the heart of your controller.
    • USB port locations vary depending on the type of calculator yous're using. If you lot can't locate the USB ports, cheque the sides or the back of your computer'south CPU (desktop) or the back of the casing (laptop).
    • If yous're connecting your controller via wireless dongle, you lot may need to start install the dongle'southward drivers. Make sure you lot follow the on-screen prompts to do and then after plugging in the dongle.
    • If your PS3 controller is paired with your PS3, commencement unplug the PS3 from its power source.
  2. 2

    Navigate to the SCP Toolkit website. SCP Toolkit provides a PC-friendly interface to which your PS3 controller can connect, which will in turn allow y'all to use your PS3 controller with PC game services like Steam.

    Advertising

  3. 3

    Click the "ScpToolkit_Setup.exe" link. It'due south the get-go link beneath the "Assets" heading on this page. Doing so will prompt the toolkit to download to your PC'southward default downloads folder (east.g., the desktop).

    • Make certain you're downloading the most recent version of the software. If y'all're on an out-of-date version's folio, you won't run into the light-green "Latest Release" sticker on the left side of the folio.
  4. 4

    Double-click the toolkit setup file. Its icon resembles a black PS3 controller. By default, you can open downloaded files from within your web browser, from your "Downloads" binder.

  5. 5

    Install ScpToolKit. If the toolkit mentions that you're missing "prerequisites" needed to run the program, click Next until the prerequisites begin installing. Otherwise, apply the following steps to Install ScpToolKit:

    • Click the checkbox next to "I concur to the License terms and conditions".
    • Click Next.
    • Click Install.
    • click Aye if prompted.
  6. six

    Double-click the ScpToolkit Commuter Installer program. It's in the file in which you installed SCP Toolkit. It has an icon that resembles a USB cable.

  7. 7

    Uncheck the "Install DualShock four Controller" box. This option is on the left side of the driver installer window. Since yous're installing a PS3 controller (due east.g., a DualShock iii controller), y'all don't want to install PS4 drivers.

    • Also uncheck the box next to "Bluetooth" if your controllers are wired (e.g., you aren't using a dongle).
    • A good rule of thumb here is to uncheck a box next to anything y'all aren't using.
    • If you're using Windows Vista, you'll demand to check the box next to "Force Driver Installation" in the middle-left side of the window.
  8. eight

    Click the box under "Choose DualShock 3 Controllers to Install". This option is on the right side of the window. You'll select your controller from here.

  9. 9

    Check the "Wireless Controller" option. You'll see a listing of all devices fastened to your calculator (eastward.m., keyboards, mouses, webcams, etc.). Your PS3 controller is the option marked "Wireless Controller (Interface [number])" where the number pertains to the USB port to which the controller is attached.

    • If you're using a not-wired controller, y'all'll need to select the USB device you're using to facilitate the connectedness nether the "Bluetooth" section above the "DualShock 3 Controllers" drop-down box.
  10. 10

    Click Install . Information technology's on the right side of the commuter installer window. Doing so will prompt SCP Toolkit to begin installing your controller'southward drivers, which should take less than five minutes on whatever compatible PC.

    • Once the installation is complete, you'll hear a confirmation noise.
    • At this indicate, your controller'due south drivers have been installed and you are ready to begin using your controller with PC games.
  11. Advertisement

Add New Question

  • Question

    I did everything equally instructed. But at the last step on Improve DS3, it did not give me the opportunity to click the Apply push button. What tin I do?

    Community Answer

    You have to select both profile and controller to accept the power to click Apply.

  • Question

    What do I exercise if it doesn't have a "save profile" message at the lesser of the window and I am on Windows vii?

    Community Answer

    Control Panel>Appearance and Personalization>Display>Make Text and other items Larger or Smaller. Set the size to "smaller" and you'll get logged out. Log dorsum in, and you lot'll find the "Save" button.

  • Question

    Can I connect 2 controllers at the same fourth dimension?

    Community Answer

    Yes, if yous have Bluetooth back up. They both need the drivers. You lot can run both by usb or Bluetooth.

  • Question

    How do I connect a PS3 controller to my PC without any special software?

    Community Answer

    It depends on your controller. The stock wireless controllers crave special software. I have an unofficial controller and I tin merely plug and play.

  • Question

    My laptop doesn't back up Bluetooth. I can't do this unless I buy a dongle, correct?

    Community Answer

    Information technology depends on your operating system. If you have Windows ten it will about probable work with a USB charger.

  • Question

    Are you certain I can trust this website? I downloaded information technology, but still feel uneasy.

    Community Answer

    When information technology'southward open source and has gotten this much attention, it's usually safe.

  • Question

    Where is the installation file?

    Community Answer

    The setup shows you where to download the file earlier downloading it. Search that place. Most probably it will exist in the C: drive in Programme Files. The folder will be named something like "Nefarius Software Solutions."

  • Question

    What do I practise if my PS3 controller is just recognized by Bluetooth and not by USB?

    Community Answer

    In that case, y'all'll need a different USB cable that supports information transfer. Most cables are data transfer compatible, but some cheaper ones are but for charging.

  • Question

    Is a PS4 controller backwards uniform?

    Community Answer

    Dualshock 4 controllers are not backwards-uniform with Dualshock 3 controllers; you'll need to download the drivers specific to those controllers.

  • Question

    Can I keep to apply Bluetooth with other devices when the PS3 controller is in apply?

    Community Answer

    No, you can't use the Bluetooth with other devices after installing every necessary drivers to work with your PS3 controller. But y'all should be able to then if you completely uninstall the SCP toolkit driver or any other drivers that works with the pad.

Inquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

  • This process will also piece of work for a PS4 controller, though you'll need to outset unpair the controller from within your PS4's Settings. You lot'll too need to install DualShock 4 drivers and select a DualShock iv controller instead of a DualShock 3.

  • If yous see whatsoever errors, endeavor uninstalling and and then reinstalling the SCP toolkit. When you reinstall, make sure yous install whatsoever prerequisites (regardless of whether or not you remember y'all demand them) and check the "Force Commuter Installation" box when installing the drivers regardless of your operating system.

  • When yous open the "Devices" manager on your PC (accessed by typing "joy.cpl" into the "Run" application), your PS3 controller will show upward as an Xbox 360 controller. This is considering the Xbox 360 controller is natively supported by Windows, while the PS3 controller is not.

Advert

About This Article

Article Summary X

one. Turn on the controller.
two. Connect the controller to your computer using a USB cable
three. Become https://github.com/nefarius/ScpToolkit/releases/tag/v1.half dozen.238.16010 in a web browser.
4. Click the "ScpToolkit_Setup.exe" link to download the install file.
5. Install ScpToolkit.
vi. Open up the "ScpToolkit Driver Installer" programme.
7. Click "Cull DualShock 3 Controllers to Install".
8. Check the "Wireless Controller" option.
nine. Click Install
For tips on troubleshooting common connectivity issues, read on!

Did this summary assistance you?

Thanks to all authors for creating a page that has been read i,095,736 times.

Did this article aid you?

How To Use Wireless Controller On Pc,

Source: https://www.wikihow.com/Use-a-PS3-Controller-on-a-PC

Posted by: curranyoughthears.blogspot.com

0 Response to "How To Use Wireless Controller On Pc"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel